 |
ATA66
and ATA100/133 are the newest standard for IDE drives.
Up until now, IDE drives have been limited in their speeds
due to noise and crosstalk of the normal 40 pin cables.
The ultra ATA has 80 wire conductors and 40 pins, the
extra wires help make the new ATA66 and ATA100 hard drives
perform like SCSI drives (reduces cross-talk, improves
signal integrity). All pins straight from 1 to 1, 2 to
2 and so on. Line 34 on the cable should be notched or
cut (this may be difficult to see).
It is used between one ATA66/100 PCI controller card and
up to two storage devices.
To support UDMA66/100/133 hard drives, ATA66/100 cable
should be installed by connecting the BLUE connector
onto the motherboard, BLACK connector to the Master
hard drive and GREY connector to the Slave hard drive.
|
| |
|
SPECIFICATION IDC
CONNECTOR |
| |
¡´Connector type: IDC SOCKET
40PIN CONNECTOR (80C)
¡´Contact No.: 68, 80
¡´Contact material: copper alloy
¡´Insulator material: PBT & glass-fiber
¡´Contact resistance: 30Mohm maximum 0.3A
¡´Insulator resistance: 1000Mohm minimum 500VDC
¡´Dielectric withstanding voltage: 500VAC/minute
¡´Operating temperature: -40C to +150C
¡´Insulator Color: Blue, Grey & Black |
|
CABLE |
| |
¡´PVC(ATA66) or TPO(ATA100) OR TPE(ATA133)
Jacket, 80 Conductors
¡´Cable Pitch: 0.635mm (stranded type)
¡´Transfer rate: 66MB/SEC for ATA-66, 100MB/SEC for ATA-100
¡´Length & Distance in accordance with your specifications
¡´OEM & ODM order is welcomed
|
| |
|
| ATA-66 FLAT CABLE |
ATA-100 FLAT CABLE 3 IDE CONNECTOR |
|
|
| ATA-133 FLAT CABLE
3 IDE CONNECTOR |
ATA FLAT CABLE WITH PULL WIR |
|
